Mapped findings, reported by an electrical engineer
We use the DJI Matrice 4T for solar panel thermal imaging and photograph each area in visible light. Aerial PV thermography shows where one module is warmer than its neighbours. We match each observation to its block, row and module so your maintenance crew can check for shading, soiling or an electrical issue on the ground. Every inspection report is prepared by an electrical engineer.

DJI Matrice 4T · Thermal and visible imaging
When to book a solar farm drone inspection
Book a commissioning baseline before handover to establish a clear reference for future inspections. Routine maintenance surveys help prioritise ground checks across the array. Targeted reinspection after storms or repairs helps confirm areas that need another look.
ILLUSTRATIVE EXAMPLE
Thermal findings

BLOCK — B3
ROW — 27
MODULE — 14
Illustrative example only: a single PV module showing an elevated hotspot compared with surrounding modules in the same row. In a report, each finding is mapped to its block, row and module location, with the thermal and visual images, so your maintenance team can go straight to the panel.
Before a solar farm thermal survey
Which site records are useful?
Send the current array layout and a key to your block, row and module labels. Flag offline strings, recent repairs and any areas outside the survey boundary. If monitoring has identified a concern, include the inverter or string reference and when it occurred so the flight can cover the right rows.
Why do operating conditions matter?
An operating array under steady sunlight gives a better basis for comparing neighbouring modules. Moving cloud, reflections and differences in operating state can affect the thermal image. Tell us which blocks are online and about planned outages; we can agree a suitable capture window with your site contact.
Can we inspect only part of the farm?
A targeted survey can focus on a repaired string, a storm-affected block or an area flagged by monitoring. A site-wide survey gives broader coverage. Mark the requested boundary so the quote and report make clear which assets are included.
Using a finding in a maintenance work order
Start with the location reference. Copy the block, row and module ID into the work order and attach the paired thermal and visible images. Record what the engineer observed and the recommended ground check separately so the crew can distinguish the observation from a confirmed fault.
Closing the loop after repairs
Record what the site team found, the action taken and the date. If a return flight is required, use the same asset ID and compare the new image with the earlier observation, noting differences in operating or weather conditions. That gives the next maintenance crew a history for the same panel.
AUSTRALIA-WIDE
Australia-wide experience
Flightpath Thermal inspects utility-scale solar farms throughout Australia, from metropolitan fringes to remote regional sites.
Utility-scale projects
Thermal drone inspections planned for large PV arrays, with findings mapped to panel locations.
Regional and remote sites
We travel Australia-wide to inspect solar farms wherever they are located.
Engineer-prepared reporting
Each report is prepared by an electrical engineer, giving asset owners clear, actionable findings.
QUOTING
What we need to quote your inspection
To prepare an accurate quote, please include the following details in your request.
01 — SITE LOCATION
The solar farm's address or coordinates within Australia.
02 — SYSTEM SIZE
Installed capacity and approximate site area or panel count.
03 — SITE LAYOUT
Any available layout drawings or string and inverter maps.
04 — ACCESS AND TIMING
Site access requirements, inductions and your preferred inspection window.

